What is the work of the High and Low Temperature Dampening Tester to be suspended?
Some users may need to use the device for a certain period of time after purchasing a High and Low Temperature Dampening Tester for some reason, and intend to archive the device. Then the equipment after use, not as long as the power can be unplugged, but the need for some maintenance work before they can archive the device.
First of all, to archive the device then the first thing to do is to unplug the power, but pay attention to keep it safe. After the high and low temperature to suppress the test room inside the cleaning. Take the sample inside the box and clean the inside of the studio and be able to dry it.
Followed by the case was the door of the box to see the seal to wipe clean, in the seal on the application of talcum powder and seal in the door contact with a thin sheet of paper, this is because the seal is made of rubber, long time Contact may occur in the phenomenon of bonding.
Finally, the High and Low Temperature Dampening Tester on the cabinet temperature controller button to be turned off to the state, so that the controller can make the spring in a relaxed state, which can improve the service life. So after doing this step, it is necessary to open the door of the device, ventilation, the best for 2 days.
Then the above is the High and Low Temperature Dampening Tester in the pause after the need to do the preparatory work, then do this work, you can put the device sealed. But there is a point that needs attention, that is, can not use plastic cover to cover the device, this is not enough, and can not be placed in the upper part of the device heavy objects, so as not to crush the device